57 research outputs found
Handling the complexity of routing problem in modern VLSI design
In VLSI physical design, the routing task consists of using over-the-cell metal wires to connect pins and ports of circuit gates and blocks. Traditionally, VLSI routing is an important design step in the sense that the quality of routing solution has great impact on various design metrics such as circuit timing, power consumption, chip reliability and manufacturability etc. As the advancing VLSI design enters the nanometer era, the routing success (routability issue) has been arising as one of the most critical problems in back-end design. In one aspect, the degree of design complexity is increasing dramatically as more and more modules are integrated into the chip. Much higher chip density leads to higher routing demands and potentially more risks in routing failure. In another aspect, with decreasing design feature size, there are more complex design rules imposed to ensure manufacturability. These design rules are hard to satisfy and they usually create more barriers for achieving routing closure (i.e., generate DRC free routing solution) and thus affect chip time to market (TTM) plan.
In general, the behavior and performance of routing are affected by three consecutive phases: placement phase, global routing phase and detailed routing phase in a typical VLSI physical design flow. Traditional CAD tools handle each of the three phases independently and the global picture of the routability issue is neglected. Different from conventional approaches which propose tools and algorithms for one particular design phase, this thesis investigates the routability issue from all three phases and proposes a series of systematic solutions to build a more generic flow and improve quality of results (QoR). For the placement phase, we will introduce a mixed-sized placement refinement tool for alleviating congestion after placement. The tool shifts and relocates modules based on a global routing estimation. For the global routing phase, a very fast and effective global router is developed. Its performance surpasses many peer works as verified by ISPD 2008 global routing contest results. In the detailed routing phase, a tool is proposed to perform detailed routing using regular routing patterns based on a correct-by-construction methodology to improve routability as well as satisfy most design rules. Finally, the tool which integrates global routing and detailed routing is developed to remedy the inconsistency between global routing and detailed routing.
To verify the algorithms we proposed, three sets of testcases derived from ISPD98 and ISPD05/06 placement benchmark suites are proposed. The results indicate that our proposed methods construct an integrated and systematic flow for routability improvement which is better than conventional methods
Dynamic characteristics and optimal design of the manipulator for automatic tool changer
In order to improve the reliability of changing tool for ATC (automatic tool changer), a horizontal tool changer of machining center is chosen as the example to study the dynamic characteristics in the condition of changing a heavy tool. This paper analyzes the structure and properties of the tool changer by simulation and experiment, and the space trajectory equations of the manipulator and tool are derived. The maximum force is calculated in the processing of changing tool. A virtual platform for the automatic tool changer is built to simulate and verify the dynamic performance of the tool changer; the simulation results show an obvious vibration in the process of changing tool, which increases the probability of failure for changing tool. Moreover, in order to find out the device's vibration reasons, a professional experiment platform is built to test the dynamic characteristics. Based on the testing results for a horizontal tool changer, it is known that the unstable vibration is mainly caused by the collision of the tool. Finally, an optimization method for the manipulator is proposed to reduce this vibration and improve the reliability of the tool changer. The final simulation and experiment results show that the optimized manipulator can grasp the heavy tool stably, and the vibration amplitude is significantly reduced in the process of changing tool
Characteristic analysis and fluctuation control for a underactuated spherical underwater robot
With robots used widely in many fields in recent years, the underwater robot with various characteristics has been thoroughly researched. As a new type of underwater spherical robot, BYSQ-2 uses the heavy pendulum to adjust the attitude, which is flexible and novel. However, it has been not fully understood that how the heavy pendulum would affect the underactuated robot’s regular movement. In this paper a fluctuation characteristic for the robot is shown, and then an adaptive control method is proposed to suppress the fluctuation. Based on the simplified structure of the robot, a swing phenomenon of the heavy pendulum is found. Moreover, the reason for the fluctuation is analyzed in the processes of the accelerating and pitching. A dynamic equation for this model is established to accurately calculate the characteristic, and the virtual simulation proves the validity of the theoretical calculation. The characteristics of this coupling fluctuation are summarized by changing motion parameters and structure parameters. The results prove that the pendulum’s length and the controlling process are closely related with the velocity fluctuation of the robot. Moreover, in order to suppress the fluctuations, a pitching controller is designed to prevent the heavy pendulum from swinging based on the method of neural network sliding mode. The RBF neural network is used to compensate the nonlinearity and disturbance uncertainties, and two sliding mode structures make the swing rapidly inhibited. At the same time, the pitch angle's error also got convergence. The stability of the control system is proof by Lyapunov and Barbalat theories. Finally, the simulation and experiment show that the control method is feasible and excellent, which can fulfill the suppressed control for the fluctuation of the robot
Experiment, simulation and analysis on coupling hydrodynamic forces under key parameters for a spherical underwater exploration robot
As a novel underwater exploration robot, BYSQ-2 spherical robot uses the heavy pendulum to change the attitudes with the characteristics of small steering resistance and high compressive strength. However, the greater water resistance in the process of moving forward obstructs the rapid movement, because the robot has a spherical shell and only one propeller. The maximum speed was obtained only 0.6 m/s according to experimental tests and theoretical calculations. In order to improve the movement speed, the robot’s virtual assembly model was built to study the coupling hydrodynamic forces between the spherical shell and the propeller by CFD method. The coupling hydrodynamic forces were analyzed and summarized under different key structural parameters that include the pipe diameter and the shell diameter. Furthermore, in the conditions of different rotational speed, propeller thrust and water resistance of robot were simulated and calculated. According to the simulation results of the model with the appropriate structural parameters, it was demonstrated that the speed of the robot was improved obviously in the process of moving forward
The Exploration and Evaluation of Generating Affective 360 Panoramic VR Environments Through Neural Style Transfer
Affective virtual reality (VR) environments with varying visual style can
impact users' valence and arousal responses. We applied Neural Style Transfer
(NST) to generate 360 VR environments that elicited users' varied
valence and arousal responses. From a user study with 30 participants, findings
suggested that generative VR environments changed participants' arousal
responses but not their valence levels. The generated visual features, e.g.,
textures and colors, also altered participants' affective perceptions. Our work
contributes novel insights about how users respond to generative VR
environments and provided a strategy for creating affective VR environments
without altering content
Isolation and Characterization of Minipig Perivascular Stem Cells for Bone Tissue Engineering
Human subcutaneous adipose tissue has been recognized as a rich source of tissue resident mesenchymal stem/stromal cells (MSC) in recent years. The current study was designed to sort the minipig (mp) perivascular stem cells (PSCs) and investigate the osteogenic potential. Purification of human PSCs was achieved via fluorescence-activated cell sorting (FACS) from human liposuction samples [cluster of differentiation (CD)45-CD34-CD146+ perithelial cells and CD45-CD34+CD146- adventitial cells]. Subsequently, PSCs were isolated from mp adipose tissue samples (n=9), characterized and, using purified mpPSCs (obtained by FACS, which is used in human PSC purification), the mpPSC osteogenic and adipogenic potential was evaluated by Alizarin Red S and Oil Red O staining in vitro, respectively. The cell morphometry was observed following cell isolation and culture, and hematoxylin and eosin staining was performed to identify the fat tissue structure and vascular distribution. Osteogenic and adipogenic differentiation-associated gene expression levels were analyzed by reverse transcription-quantitative polymerase chain reaction. The results demonstrated that the same antigens used for human PSC identification and isolation were working in mp tissue (CD45, CD146 and CD34). The two cell groups: CD45-CD34-CD146+ pericytes and CD45-CD34+CD146- adventitial cells were successfully isolated from the subcutaneous fat in the posterior neck of mps, mpPSCs accounted for 8.6% of the stromal vascular fraction (SVF) with 1.4% pericytes and 7.2% adventitial cells. mpPSCs demonstrated characteristics of MSCs, including cell surface marker expression, colony forming unit-fibroblast inclusion, and the stronger osteogenic and adipogenic differentiation potential than that of the non-selected vascular stromal cells. The mRNA expression levels of osteocalcin, collagen, type I, α1 and peroxisome proliferator-activated receptor-γ in the mpPSCs group were significantly higher than those of the unsorted pSVF group (P\u3c0.05). Thus, the current study successfully isolated and cultured CD146+ and CD34+ cell populations from mp tissues, characterized the cells\u27 PSC-like phenotype and identified their distinctly osteogenic and adipogenic potential. © Spandidos Publications. All rights reserved
Validation of the neural network for 3D photon radiation field reconstruction under various source distributions
Introduction: This paper proposes a five-layer fully connected neural network for predicting radiation parameters in a radiation space based on detector readings.Methods: The network is trained and tested using gamma flux values from individual detector positions as input, and is used to predict the gamma radiation field in 3D space under different source term distributions. The method is evaluated using the mean percentage change error (PCT) for the test set under different source term distributions.Results: The results show that the neural network method can accurately predict radiation parameters with an average PCT error range of 0.53% to 3.11%, within the given measurement input error range of ± 10%. The method also demonstrates its ability to directly reconstruct the 3D radiation field with some simple source terms.Discussion: The proposed method has practical value in real operations within radiation spaces, and can be used to improve the accuracy and efficiency of predicting radiation parameters. Further research could explore the use of more complex source term distributions and the integration of other types of sensors for improved accuracy
Recommended from our members
Neural EGFL-Like 1 Is a Downstream Regulator of Runt-Related Transcription Factor 2 in Chondrogenic Differentiation and Maturation
Recent studies indicate that neural EGFL-like 1 (Nell-1), a secretive extracellular matrix molecule, is involved in chondrogenic differentiation. Herein, we demonstrated that Nell-1 serves as a key downstream target of runt-related transcription factor 2 (Runx2), a central regulator of chondrogenesis. Unlike in osteoblast lineage cells where Nell-1 and Runx2 demonstrate mutual regulation, further studies in chondrocytes revealed that Runx2 tightly regulates the expression of Nell-1; however, Nell-1 does not alter the expression of Runx2. More important, Nell-1 administration partially restored Runx2 deficiency–induced impairment of chondrocyte differentiation and maturation in vitro, ex vivo, and in vivo. Mechanistically, although the expression of Nell-1 is highly reliant on Runx2, the prochondrogenic function of Nell-1 persisted in Runx2−/− scenarios. The biopotency of Nell-1 is independent of the nuclear import and DNA binding functions of Runx2 during chondrogenesis. Nell-1 is a key functional mediator of chondrogenesis, thus opening up new possibilities for the application of Nell-1 in cartilage regeneration. © 2017 American Society for Investigative Patholog
Handling the complexity of routing problem in modern VLSI design
In VLSI physical design, the routing task consists of using over-the-cell metal wires to connect pins and ports of circuit gates and blocks. Traditionally, VLSI routing is an important design step in the sense that the quality of routing solution has great impact on various design metrics such as circuit timing, power consumption, chip reliability and manufacturability etc. As the advancing VLSI design enters the nanometer era, the routing success (routability issue) has been arising as one of the most critical problems in back-end design. In one aspect, the degree of design complexity is increasing dramatically as more and more modules are integrated into the chip. Much higher chip density leads to higher routing demands and potentially more risks in routing failure. In another aspect, with decreasing design feature size, there are more complex design rules imposed to ensure manufacturability. These design rules are hard to satisfy and they usually create more barriers for achieving routing closure (i.e., generate DRC free routing solution) and thus affect chip time to market (TTM) plan.
In general, the behavior and performance of routing are affected by three consecutive phases: placement phase, global routing phase and detailed routing phase in a typical VLSI physical design flow. Traditional CAD tools handle each of the three phases independently and the global picture of the routability issue is neglected. Different from conventional approaches which propose tools and algorithms for one particular design phase, this thesis investigates the routability issue from all three phases and proposes a series of systematic solutions to build a more generic flow and improve quality of results (QoR). For the placement phase, we will introduce a mixed-sized placement refinement tool for alleviating congestion after placement. The tool shifts and relocates modules based on a global routing estimation. For the global routing phase, a very fast and effective global router is developed. Its performance surpasses many peer works as verified by ISPD 2008 global routing contest results. In the detailed routing phase, a tool is proposed to perform detailed routing using regular routing patterns based on a correct-by-construction methodology to improve routability as well as satisfy most design rules. Finally, the tool which integrates global routing and detailed routing is developed to remedy the inconsistency between global routing and detailed routing.
To verify the algorithms we proposed, three sets of testcases derived from ISPD98 and ISPD05/06 placement benchmark suites are proposed. The results indicate that our proposed methods construct an integrated and systematic flow for routability improvement which is better than conventional methods.</p
A Perfect Sampler for Hypergraph Independent Sets
The problem of uniformly sampling hypergraph independent sets is revisited. We design an efficient perfect sampler for the problem under a similar condition of the asymmetric Lovász local lemma. When specialized to d-regular k-uniform hypergraphs on n vertices, our sampler terminates in expected O(n log n) time provided (Equation presented) where c > 0 is a constant, matching the rapid mixing condition for Glauber dynamics in Hermon, Sly and Zhang [10]. The analysis of our algorithm is simple and clean.ISSN:1868-896
- …